-
台时产量高，对原粉磨425#525#水泥的台时产量可提高30~60%，单位电耗下?0%左右，降低成本，提高规模效益、/div>
-
投资少，与闭路型投资相比，可节省40-50%的经费，与带有预破碎辊压机的闭路型相比，仅占40%左右、/div>
-
运转率高，一般可?0%以上，因磨内部件使用的是耐磨材料，实际达95%以上、/div>
-
采用磨内筛分和选粉工艺，使磨机各仓研磨体级配更加合理、使用效率高，可降低研磨体的耗用量，同时可延长衬板和篦板的使用寿命、/div>
-
成品比表面积增加，一般提?0-50?㎏混合材掺入量相应提?0-15%、/div>
-
老磨机改造不超过一周期，三天左右即可全部完工投产、/div>
-
Production per machine hour is high.Production per machine hour of lnitial powder of 425#,525# cement canbe increased by 30-60%.Unit current drain can be decreased by about 30%.The cost is decreased and the business profit is obuiously increased.
-
Less investment.Comparing to closed-type inestment,the cost is saved by 40-50%;and it can takes up approximately 40% of the cost? of precomminutio
-
High running rate.Normally it can be over 90%.As the interior parts of the grinder are made of abrasive resistant materials.the actual running rate can be over 95%.
-
The new screening and concentrating processes adopted makes the gradation of grain ineach chamber more reasonable and working efficiency is high, which deduces the consumption of the grinding batches and prolong the service life of scaleboard and grid plate.
-
Lncrease surface area of finishes product.Generally by 20-50%??Admixing amount of composite material is accordingly increased by 10-15%.
-
The time of renovation and reconstruction of old grinder will not more than one week.. Normally,about three days it will be completesd and put into prodution.
