工程喷砂�?-5mm铁砂优质除锈铁砂

工程喷砂�?-5mm铁砂 优质除锈铁砂

铁砂概述９�/span>

铁砂由铁丸经热处理后破碎而成，硬度高、棱角锋利、其破碎后形成的尖锐的边缘使其具有高速喷刻蚀和刮削特性。特别用对刻蚀和刮削要求较高的金属表面处理，也常用于室外喷砂作业的表面处理工程、�/span>

铁砂的分类及性能９�/span>

硬度适中、韧性强、抗冲击，可连续几次反复使用，寿命长，反弹性好，附着力强，清理速度快耗砂低，不破碎，清理工件亮度大，技术效果好，经本产品处理的金属表面清洁度可达国际标准。表面粗糙度�?5--100um，从而增加了金属表面的接触面，提高了涂抹的表面附着力，对细化金属表面强化金属结构，具有十分显著的经济效益，是目前国内外最先进、最理想的清理喷抛、除锈和强化的优质材料、�/span>

铁砂主要用途：

抛丸清理、喷丸清理、压铸件清理、铸件抛丸清理、锻件抛丸清理、锻件喷丸清理铸件清砂、钢板清理、钢材清理、钢板清理、H型钢清理、型钢清理、钢结构清理、�/span>

除锈：抛丸除锈、喷丸除锈、铸件除锈、锻件除锈钢板除锈、锻件除氧化皮、钢材除锈、H型钢除锈、钢结构除锈、喷砂除锈、钢板除锈、喷砂房二次喷砂除锈、喷砂房二次喷砂清理、�/span>

喷丸：型钢喷丸、型钢喷砂、船板抛丸、钢板喷丸、钢材喷丸、�/span>

抛丸９�/span>钢板抛丸、钢材抛丸、型钢抛丸、�/span>

打砂９�/span>打砂处理、�/span>

前处琅�/strong>：涂装前处理、涂装预处理、表面预处理、船板预处理、型钢预处理、钢材预处理、钢板预处理、钢结构前处理、、�/span>

2.0-90 1.7-75 1.4-65 1.2-45 1.0-35 0.8-20 0.6-12 0.4-5（目（�/span>

售后服务９�/span>

售前９�/span>耐心讲解产品的用途、使用方法、检测产品的指标、报价、免费寄样；

售中９�/span>跟踪产品运输、到达时间；使用情况回访；如有需要可随时派技术员现场指导客户调试，培训操作人员；

售后９�/span>全天24小时咨询、解疑，产品在使用过程中出现任何问题，我们将以最短的时间给予解决、�/span>

联系方式９�/span>

登封市卢店镇开元磨料厂

联系人：付明伞�/span>

座机�?371-89991307

传真�?371-60260265

手机�?8337161813

QQ�?636733790

邮箱�?636733790@qq.com

厂址９�/span>中国河南郑州登封市卢店镇吴岗材�/span>

Iron ore isoperation:

Iron sand by iron pills after heat treatment after crushing and become, high hardness, edge sharp, its broken formed after the sharp edge, which has high speed spray etching and skiving characteristics. Special use for etching and skiving requirements higher metal surface treatment, it is also used in outdoor sand work surface treatment engineering.

Iron sand the classification and performance:

Steel shot features: moderate hardness, toughness, impact resistance, can use repeatedly for several times, long life, good elasticity, anti adhesion, speediness consumption sand is low, not broken, cleaning work intensity big, the technical effect is good, after the product processing of metal surface clearness can reach the international standard. The surface roughness of 25-100 um, thus increasing the surface of the metal contact surface, improve the adhesion on the surface, the refining metal surface strengthening metal structure, has a very significant economic benefits, at home and abroad is the most advanced, the most ideal cleaning blast, cleaning and strengthening of quality materials.

Steel shot, steel grit main performance:

Steel grit: GB6485-86

Chemical composition: carbon (C) : 0.70 ~ 1.20% manganese (Mn) : 0.35 ~ 1.20% silicon (Si) : 0.40 ~ 1.20% sulfur (S) : 0.05% or less phosphorus (P) : 0.05% or less

Hardness: 42 HRC (399 ~ 509 hv) density: 7.45 g/cm

Metallographic organization: tempered martensite + dispersion distribution carbide

Hardness: 45-65 HRC density: 7.58 g/cm3

Steel shot: GB6484 - - - - - 86

Iron sand main use:

Blast cleaning, shot blast cleaning, die casting cleaning, casting blast cleaning and forging blast cleaning and forging shot blast cleaning sand castings, steel plate cleaning, cleaning, steel plate cleaning, h-beam cleaning, clean steel, steel structure cleaning.

Cleaning: blast cleaning, shot peening, casting derusting, forgings derusting steel rust removal, forgings descaling, steel rust removal, H section steel rust removal, steel structure rust removal, sand blasting, steel rust removal, sandblasting room secondary sand blasting, sand room secondary blasting.

Peening: steel grit, steel sand, boat is shot, steel grit, steel grit.

Blast: steel blast, steel blast, steel blast.

Play sand: play sand processing.

Preparation: coating pretreatment, coating pretreatment, surface pretreatment, boat pretreatment, steel pretreatment, steel pretreatment, steel pretreatment, steel structure processing, before.

2.0-1.7-1.4-1.2 - and 1.0-0.8 - and 0.6-35 12 0.4-5 (mesh) (mesh)

Steel shot, cast steel shot, steel grit, commonly known as projectile, chrome molybdenum steel pill, is cast iron pill and iron pill alternative products, is used for roller, chain, hook type, caterpillar, through the type, rotating table, product put type, step by step, car type shot blasting machine, shot blasting machine, shot blasting equipment, shot blast machine, blast pill, shot blasting equipment, sandblasting machine, sandblasting equipment, steel pretreatment line, steel pretreatment line, steel structure pretreatment line of metal abrasive. This product is made of superior raw materials scrap, adding rare metal and alloy, the optimal proportion of electric furnace smelting, modern equipment production into steel grit, and after repeated heating processing, automatic screening, in liquid metal forming steel grit in the process, the chemical composition, particle size are subject to strict control, so as to ensure its mechanical properties meet a wide range of USES. Each production link is the most strict quality management, the production of steel shot internal organised, not easy and broken, uniform particle size distribution, with proper hardness, impact resistance is strong, long service life.

Moderate hardness, toughness, impact resistant, long service life, up to 2000-2900 times, but has good elasticity, speediness, consumption is low, not broken, speediness, technical effect is good. After the product processing of metal surface clearness to GB/T8923-1989; The surface roughness of Rz = 10-150 �� m, thereby increasing the metal surface specific surface area surface and improve the coating the surface of the coating adhesion, have very significant economic benefits, at home and abroad is the most advanced, the most ideal blasting shot blasting and strengthen with metal abrasive cleaning.

High carbon steel pill main technical requirements

Specifications level: S400 ~ S030;

Microhardness: 390 hv - 530 hv,

Chemical composition: carbon: 0.8% 1.2%, manganese: 0.35% 1.2%, silicon, or 0.4%, sulfur, phosphorus: 0.05% or less,

Metallographic organization: tempered martensite or tempering closely;

Density was 7.0 g/cm3;

The total amount of 20% or less defects;

Foreign material or less 1%;

Water content of 0.2% or less.

Steel cut wire shot:

Steel cut wire shot just as its name implies is to use wire cut into the pill granule, use according to the use of steel wire is divided into different stainless steel cut wire shot and ordinary high carbon steel cut wire shot and mild steel cut wire shot. Cut into the pill granule have not passivation (cylindrical) and after passivation concept (round).

Steel shot model and USES:

S - 550 S - 460:

Large and medium-sized cast iron, cast steel, forging parts, heat-treated pieces, steel plates, steel tube cleaning, cleaning, reinforcement, forming

S - 390 S - 330:

Medium and small cast iron, malleable cast iron, small and medium-sized casting products, thermal substandard goods, steel plates, steel, steel pipe, steel casting, chain, nonferrous alloy of cleaning, cleaning, reinforcement, forming

S - 280:

Small cast iron, small casting products, thermal substandard goods, aluminum, steel, cast copper alloy, gold plated before treatment, enhance the elasticity and toughness

S - 230 S - 170 S - 110:

Stainless steel plate, sheet steel, nonferrous alloy surface coating before treatment, enhance the elasticity and toughness, wire reinforcement processing.

Iron sand USES:

Blast cleaning, shot peening, casting derusting, forgings derusting steel rust removal, forgings descaling, steel rust removal, H section steel rust removal, steel structure rust removal, sand blasting, steel rust removal, sandblasting room secondary sand blasting, sand room secondary blasting.

Kaiyuan product supply:

』�/span>dengfeng city Lou shop town kaiyuan abrasive

联系方式９�/span>

登封市卢店镇开元磨料厂

联系人：付明伞�/span>

座机�?371-89991307

传真�?371-60260265

手机�?8337161813

QQ�?636733790

邮箱９�/span>2636733790@qq.com

厂址９�/span>中国河南郑州登封市卢店镇吴岗材�/span>

联系方式９�/span>

登封市卢店镇开元磨料厂

联系人：付明伞�/span>

座机�?371-89991307

传真�?371-60260265

手机�?8337161813

QQ�?636733790

邮箱９�/span>2636733790@qq.com

厂址９�/span>中国河南郑州登封市卢店镇吴岗材�/span>