STM32L152RBT6/STM8S003K3T6C 托盘

STM32L152RBT6/STM8S003K3T6C 托盘的详细描述：

Standby modeThe Standby mode is used to achieve the lowest power consumption. The internalvoltage regulator is switched off so that the entire 1.8 V domain is powered off. ThePLL, the HSI RC and the HSE crystal oscillators are also switched off. After enteringStandby mode, SRAM and register contents are lost except for registers in the Backupdomain and Standby circuitry.The device exits Standby mode when an external reset (NRST pin), an IWDG reset, arising edge on the WKUP pin, or an RTC alarm occurs.Note:The RTC, the IWDG, and the corresponding clock sources are not stopped by entering Stopor Standby mode.3.6Interconnect matrixSeveral peripherals have direct connections between them. This allows autonomouscommunication between peripherals, saving CPU resources thus power supplyconsumption. In addition, these hardware connections allow fast and predictable latency